Thermotub (900 x 800 x 2000 mm)
THERMOTUB® is a complete shower stall, watertight, that has a sober and functional design.
THERMOTUB® consists of a shower tray (900 x 800 x 100 mm), back- and side-walls, a pre-assembled valveplate and a curtain or doors.
The shower tray is pressed from one piece of aluminium sheet, 2 mm thick, and hence it has no sharp edges nor welds. The shape of the bottom assures a good discharge of the waste water. Tray and socle are pre-assembled, a 1 1/2" siphon is supplied. The front access panel of the socle is removable.
Finish: epoxy-polyester coating, Soft-White
Back- and side walls are available in steel or in aluminium with a Soft-White epoxy-polyester coating. The shape of the back wall allows concealed installation of the piping, and leaves no space between the shower and the wall. The back wall is provided with an opening at its left side for fitting a mixer plate.
Profiled seals between the back- and side-walls guarantee complete watertightness.
Sound-deadening materials are applied to the tray and the back wall.
- The tray is pressed from one piece and shows no welds
- Watertight assembly - no silicones needed
- Economy of space, self-contained unit
- Requires water supplies and waste connection only
- Durable materials
- Saves water and energy
- Ease and speed of installation
- Applied sound-deadening materials
- Maintenance friendly
PRE-ASSEMBLED VALVEPLATES
At the left side of the back wall, an opening is provided for installing one of the following mixer-plates
Type 35Dual Control mixer with handshower, rail and sliding bracket  |
 | | Type 12Single control mixer with handshower, rail and sliding bracket  |
Type 18Single control mixer with diverting switch, overhead shower and handshower  |
| | Type 23Thermostatic mixer with handshower, rail and sliding bracket  |
Type ST:
- Tray
- Tray frame
- Upper trim made of aluminium
- Back-and side walls made of coated steel
Type SA:
- All parts of aluminium
Type SK:
- All metal parts made of aluminium, side-walls and doors made of transparent synthetic glass.
SA and SK models include an accessory shelf for soap and bottles.
With decorative curtain
For ST11, SA11
Order Codes »With diamond synthetic acrylic doors
For ST15, SA15
Order Codes »With transparent synthetic acryclic doors
For ST17, SA17
Order Codes »
- Shower tray pressed from one piece aluminium, 2 mm thick
- Walls type ST: steelplate 0,8 mm thick
- Walls type SA: aluminium 0,9 mm thick
- Anticorrosive zinc phosphating and white epoxy-polyester coating RAL 9010
- Dimensions: 900 x 800 x 2000 mm
- The mixer plates are complete with two 1/2" flexibles stainless steel braided supply lines, L. 1800 mm
Shampoo rack
Ref GALERIE
For type STA: option
Filler Section + Profile Left Front
Ref P480110: Left
Ref P480130: Right
| Thermotub Shower Cubicle | ||
| Model | Valveplate | Color |
| ST11- ST15- ST17- | 12 18 23 35 | 99 |
| SA11- SA15- SA17- | 12 18 23 35 | 99 |
| ST : Shower Cubicle with aluminium tray and upper rim, back- and side walls of phosphate coated stove enamelled steel with epoxy polyester-coating SA : Shower Cubicle in aluminium 99 : White | ||