Line 5

Ask more info

Ask more info
Technical Information & Brochures
Sustainability label
1 2 3 4

The Line 5 is an infrared faucet where you have the choice between a battery or a plug-in transformer. The batteries can function as a backup for the transformer. The Line 5 has is vandal resistant: 0.5 gpm nozzles and includes a 4" deckplate and a flexible supply line. This electronic faucet is barrier free and ADA.

L5-series electronic faucet
Detection systemThe Line 5 electronic faucet is equipped with an active infrared detection system with a self-adjusting detection zone. When the user's hands enter the sensing range, the indicator light in the sensor window will light up and the water will start flowing.
Water savingsThe water flow will stop when the hands are removed from the sensing range and wil stop automatically after 70 seconds to avoid waste of water. There will be a delay time of 4 seconds between separate water cycles to avoid waste.
Power supplyThe faucet can be powered with either 4 AA alkaline batteries or with a plug-in transformer. Both are supplied standard with the faucet.
Battery backupIn the event of a power failure, the faucet will automatically switch to battery power if batteries are installed. Batteries need to be tested periodically in order to assure that they haven't surpassed their shelf life.
The Line 5 faucet complies with AD
LEED ComplianceThe faucet is supplied with a 0.5 gpm vandal resistant nozzle
Standard included- Deck plate for 4" center set lavatory
- 4 AA batteries (can be used as only power source or as battery backup for transformer)
- 120V AC/6V dc UL listed plug-in transformer
- 0.5 gpm vandal resistant nozzle
- Mounting hardware
- 24" flexible supply lin
Technical specifications
Power6V AC
Power consumption<0.3 mW
Sensing distance9" to 10"
Water pressure7.5 psi - 100 psi
Temperature33° F to 113 ° F
Supply1/2"
Water flow0.5 gpm
InstallationBattery box and electronics are installed under counter top
Warranty: 1 year (limited)

The Line 5 faucet contributes to meeting LEED requirements in the following categories:

  • WEp1 - Water Efficiency
  • WEc3 - Water Use Reduction

The nozzle has a flow rate of 0.5 gpm.

The water will flow as long as the hands are under the sensor with a maximum of 30 seconds.